Chemical-resistant plastic with high flexibility Polyethylene (PE) is a standard thermoplastic and one of the most widely used polymers worldwide. The material is characterized by its high chemical resistance, flexibility, and excellent moisture resistance. Polyethylene exhibits very high resistance to a wide range of chemicals, including acids, alkalis, and alcohols. This property makes the material
PFAS are per- and polyfluoroalkyl substances, which include fluoropolymers such as PTFE. The decades-long, uncontrolled use of fluorinated compounds has raised significant social and political concerns. The global environmental impacts, including those caused by the careless release of fluorinated surfactants, cannot yet be fully assessed. Everyone who has used PFAS to date should take responsibility
High-temperature-resistant plastic with excellent electrical properties PEI (polyetherimide) is an amorphous high-performance thermoplastic that combines high strength, excellent heat resistance, and outstanding electrical properties. The material is primarily used in applications that require high temperature resistance, mechanical strength, and electrical insulation. PEI offers high mechanical strength and stiffness. These properties are largely maintained even at
High-performance material for extreme thermal and mechanical requirements PEEK (Polyether Ether Ketone) is a high-performance thermoplastic belonging to the polyaryletherketone (PAEK) family. The material is characterized by exceptional temperature resistance, outstanding mechanical properties, and excellent chemical resistance. PEEK is primarily used in applications where standard plastics reach their performance limits. PEEK exhibits very high mechanical
High-Temperature and Chemical-Resistant Material for Precision Components Polyphenylene Sulfide (PPS) is a semi-crystalline high-performance plastic with exceptional thermal and chemical resistance. The material can be used continuously at temperatures of approximately 200–240°C (392–464°F) without significant loss of its mechanical properties. PPS is characterized by its excellent dimensional stability. Due to its low coefficient of thermal
The Standard for Plain Bearings Polyethylene terephthalate (PET) is a highly machinable engineering plastic distinguished by its high mechanical strength and excellent sliding properties. Thermally, PET can be used continuously at temperatures up to approximately 115°C (239°F) and can withstand short-term exposure to temperatures of up to 140°C (284°F), while maintaining a stable combination of
Transparent high-performance plastic with temperature and hydrolysis resistance Polysulfone (PSU) is an amorphous high-performance thermoplastic with high temperature resistance and excellent hydrolysis resistance. The material can be used continuously at temperatures up to approximately 150–160°C while retaining its mechanical strength. A key characteristic is its excellent resistance to hot water and steam, making PSU particularly
The PFAS-free material with excellent wear resistance UHMW-PE (ultra-high-molecular-weight polyethylene) has a structure that is relatively similar to that of PTFE. Instead of fluorine, the carbon chains are bonded to hydrogen atoms. This significantly alters its range of applications. Features: Enduflon® is a registered word and design mark of bock machining gmbh.
Leichter und chemikalienbeständiger Kunststoff mit hoher Flexibilität Polypropylen (PP) ist ein teilkristalliner Standardthermoplast, der sich durch ein sehr gutes Verhältnis von mechanischen Eigenschaften zu Gewicht auszeichnet. Mit einer Dichte von etwa 0,9 g/cm³ gehört PP zu den leichtesten technischen Kunststoffen und ermöglicht somit gewichtseffiziente Konstruktionen. Der Werkstoff weist eine sehr gute chemische Beständigkeit gegenüber Säuren, Laugen
Maßstabiler Konstruktionskunststoff für präzise Bauteile POM (Polyoxymethylen), auch als Acetal bekannt, ist ein technischer Thermoplast mit hoher Steifigkeit, sehr guter Maßhaltigkeit und niedrigem Reibungskoeffizienten. Der Werkstoff wird vor allem für präzise, mechanisch belastete Bauteile eingesetzt. POM zeichnet sich durch eine hohe mechanische Festigkeit und Steifigkeit aus. Dadurch eignet sich das Material für Bauteile, die Belastungen
- 1
- 2